*. Note: this operation may not work for some phone’s S-boot. In this case try to write another firmware version or only S-boot from firmware and repeat the operation again.
Also note: This operation will not reset/delete user data on the device!
This new Reset FRP/Reactivation lock operation needs specific connection sequence using Samsung Micro UART (with 525 kOhm resistor inside), Micro USB and again Micro UART cables. To perform new reset FRP operation do the following steps:
1. Select mentioned above device model in Software’s list.. 2. Press «Reset FRP / Reactivation» button. 3. Select first Reset FRP/Reactivation lock method (press «Via UART (eMMC memory chip)» button). 4. Connect the phone to Box via Samsung Micro UART cable. 5. Press and hold “Vol-” and “Power” buttons for 15-20 seconds and wait until software will ask you to connect Micro USB cable. 6. Connect the phone to PC via Micro USB cable. Software will read some data. 7. When Software ask, connect the phone to Box again via Samsung Micro UART cable. 8. Press and hold “Vol-” and “Power” buttons for 15-20 seconds. 9. Follow software instructions (prompts).
~ Added Unlock for T-Mobile Galaxy S7 SM-G930T and Galaxy S7 Edge SM-G935T! Unlock operation doesn’t touch KNOX and need only 210 Octopus/Octoplus Server Credits! You can buy Octopus/Octoplus Server Credits from your local reseller or directly HERE. ~ Added «Via UART (UFS memory chip)» operation for Samsung SM-N9200 (thanks to mr. kashif9). ~ Fixed “Odin protocol error” issue on Write Firmware for SM-G930A/SM-G935A . . >>>> للتحميل اضغط هنا <<<<.
. HazeM HomS